Description

The patient Lifting Device are electrically powered mobile lifts, designed to be used in most of the common lifting situations, for example transfers between bed and wheelchair to and from toilet and bathtub or for lifting to and from the floor. Selecting the appropriate slings and accessories for each individual is important to assure maximum function and safety when using a patient lift.

The Lifting can be adjusted to three different heights to give the most appropriate lifting range. The mid-range is the standard position, while the lower position may be the most suitable for lifting children or from the floor. The upper position may be needed for higher lifts for example to beds and gurneys that cannot be lowered.

Specifications:

• Model: JBH29002F
• Overall Length: 1110 (mm)
• Highest Adjustment: 645-1875 (mm)
• Width Adjustable: 640-880 (mm)
• Weight Capacity: 180 (kg)
• Net Weight: 37 (kg)

Technical Data:

• Lifting Speed: 7 mm/s without load
• Batteries: 2 pcs. 12V2.9 Ah valve-regulated lead-acid gel-type batteries. New batteries are available form supplier.
• Battery Charger: Built-in charger, 100-240 V AC 50-60 Hz, max.400 mA.
• Motor (mast): This device is timotion; 24V motor, rechargeables lead-acid battery, maximum load, thrust 12,000 N, working cycle: 10% maximum 2 min/ 18 min; maximum current 10Amp
• Motor (Base) : This device is timotion; DC24V; maximum load, maximum tensile 2500N;
• Material: Painted aluminum with lacquer top coat.
• Emergency lowering: Mechanical and electrical.
• Intermittent operation: nt. Op 10/90, active operation max 2 min. Out of a time of 100, active must be less than 10, though not more than 2 min.
• Degree of protection: IP X6
• Sound Level: <55 db

The maximum charge is reached after about 6 hours. When the batteries are fully charged, the charger disconnects automatically.

Limited Warranty (3 months) against manufacturing defects